CMX 50 Finer/Polisher

The Gerber Coburn CMX50 Finer / Polisher, an affordable and robust solution for the conventional fining and polishing, delivers exceptionally accurate lenses by combining optimal processing times with pressures in accordance with the lab's specified materials. CMX50 processes via two spindles the entire spectrum of materials including CR39® ,polycarbonate, hi-index and glass.

Processing lenses with CMX50 begins by choosing a lap from stock with the correct base and cross curves and applying either a fining or polishing pad to it. Operators can conveniently select either a fining or polishing pad from the built-in-pad dispenser. A removable bar on the dispenser holds approximately three fining or polishing pad rolls.

Advanced Features

Customers can now tailor the Acuity Plus to suit their specific laboratory needs. This innate flexibility makes the unit ideal for a wide variety of processing environments.

An enhanced fluid delivery system provides increased clearance for lap and lens loading, allowing faster loading and unloading. It also increases the coolant /slurry flow rate, which increases productivity by reducing processing times and minimizing lens re-work. And, a redesigned pump system increases reliability, reducing maintenance costs. An enhanced fluid delivery system provides increased clearance for lap and lens loading, allowing faster loading and unloading. It also increases the coolant /slurry flow rate, which increases productivity by reducing processing times and minimizing lens re-work. And, a redesigned pump system increases reliability, reducing maintenance costs.

Heavy-duty rod end bearings also decrease maintenance costs while affording improved system reliability.

The flat front panel (optional), designed for use with a lens rinsing line or job tray conveyor system provides the ergonomics necessary to minimize operator reach.

The optional compliant adapter eliminates traditional fining pins allowing faster lens loading & reducing maintenance costs.

380 volt/three phase motor version provides smoother cycle starts and quieter operation.

Specifications

Power

230 VAC, 50/60 Hz, 7.5 Amps
Single phase requires dedicated circuit

Air Requirements

80 psi (minimum)
100 psi (maximum)

Water Pressure

40 psi (maximum)

Dimensions

26" (w) x 35"(d) x 64"(h)
66 cm x 89 cm x 64 cm

Weight

370 lbs/ 168 kg

System Components